2.2 out of 5 star rating
15 reviews
48" Strip Warmer with Toggle Control and Cord - 120V, 1,200W
Features
- Single toggle control allows for simple operation
- Ensures food stays hot between plating and serving
- Metal sheathed element ensures ideal serving temperatures without drying out food
- Heavy-duty stainless steel housing won't sag
- Aluminum reflector retains heat and directs it towards the holding surface
Certifications
5-15P
This unit comes with a NEMA 5-15P plug.
UL Listed, US
This product has been certified by the Underwriters Laboratories (UL) to meet applicable safety standards required for use in the United States.
NSF Listed
This item has been certified by NSF International to meet applicable product standards on public safety, health, and / or the environment.
Product Features
Keep your food hot and ready to serve with this Avantco 48" strip warmer with toggle control. Ideal for use in restaurants, cafeterias, and buffet lines, this strip warmer boasts thick insulation and an aluminum reflector to minimize heat loss and direct the heat to your food. It features a simple on / off toggle control for easy use.
This item requires a 120V electrical connection and provides an impressive 1200 watts of heat. It includes a cord and plug so you can begin using it immediately, and it can be easily installed directly into overshelves with the included mounting brackets or hung with support chains (sold separately). It boasts a heavy-duty stainless steel housing that won't sag, making it perfect for busy kitchen settings. The metal guards support the heating element without affecting heat distribution. Plus, the heating element is sheathed to help maintain temperature without drying the food out. For a simple and efficient way to keep your food hot before serving, try this strip warmer!
Overall Dimensions:
Width: 48 1/8"
Depth: 6 3/16"
Height: 2 5/8"
Avantco Strip Warmers
Avantco strip warmers make it easy to keep prepared foods hot and fresh for customers. Watch this video to learn more about these powerful strip warmers!
Specifications
- Width 48 1/8 Inches
- Depth 6 3/16 Inches
- Height 2 5/8 Inches
- Power Cord Length 70 7/8 Inches
- Depth (with Control) 7 3/4 Inches
- Height (with Bracket) 3 15/16 Inches
- Hertz 60 Hz
- Phase 1 Phase
- Voltage 120 Volts
- Wattage 1,200 Watts
- Color Silver
- Connection Type Cord and Plug
- Control Type Attached Toggle
- Features NSF Listed
- Features Overhead
- Heating Source Metal Sheathed / Calrod
- Material Stainless Steel
- Plug Type NEMA 5-15P
- Power Type Electric
- Style Single
- Type Strip Warmers
- Usage Light Duty
Customer Reviews
2.2 out of 5 star rating
15 reviews
- 3 customers gave 5 star ratings53
- 1 customers gave 4 star ratings41
- 1 customers gave 3 star ratings31
- 1 customers gave 2 star ratings21
- 9 customers gave 1 star ratings19
Share your thoughts
If you've used this product, log in and leave a review to tell us and other customers what you thought about it.
Claudia C.
August 26, 2025
perfect, easy to use and install, recommend.
David E.
June 13, 2023
Needed something to keep plates warm as I prepped food and cooked, worked out very well
Daddy D.
September 15, 2018
This strip warmer works great for keeping our hushpuppies hot between orders. We have not had any issues and it was more inexpensive than obtaining one from somewhere else.
Jesse H.
October 7, 2018
This item does a good job keeping our hot food hot. My only complaint is that it does not come with a cord. So, keep the extra cost in mind of having to wire it.
Cassidy J.
February 15, 2025
Takes a little while to heat up but once its heated it can get pretty hot. Good quality overall. The switch is also convenient. Cannot adjust the temp however.
Ronald W.
November 13, 2025
Lasted 2 months, dont waste your money.
Randy T.
November 30, 2025
This product has been replaced four times in eight months. While each replacement was covered under warranty, the repeated installations have been extremely costly for us. Customer service ultimately offered a refund rather than another replacement, stating that we could purchase a different brand on our own at double the cost. Based on our experience, these units last only about three months under standard restaurant use. I would strongly recommend choosing a different brand.
Adam C.
November 2, 2025
I have had 2 of these die on us in 5 months. They appeared to have failed (fried) somewhere in the control box. They were the hardwired to 2 independent 20 amp 120 circuits.
Kelly Q.
October 17, 2025
Trash. I have been through three of these in six months. Exercise the warranty and get another only to have it fail as well. Tired of switching it out. Going to get another brand and eat the loss
Beth H.
October 6, 2025
Didn't even last 2 months! Don't waste your money on this product
